Molds play a very important role in industrial production. And mold cleaning is the key to maximizing the service life of molds, improving the reliability of molds, and ensuring product quality. Mold cleaning is a key process in mold maintenance, and it is also a bottleneck restricting mold maintenance. Because the speed of mold manufacturing and development is much faster than the speed of mold cleaning, and the mold is ready for the next production immediately after rapid cleaning, so the time left for mold cleaning is quite limited, and it is more important to choose a favorable way to clean molds, because it can not only ensure the quality of subsequent production products, mold maintenance and cleaning, but also help enterprises improve work efficiency.
Typically, when the molding process is completed, there is often a residue left on the mold. Final cleaning requirements vary for different types of residues. Resins like PVC produce gases that corrode many types of mold steel. Other residues are separated from flame retardants and antioxidants, which can corrode steel. There are also pigment colorants that can rust steel, and rust is difficult to remove. Even ordinary sealing water, if left on the surface of an untreated mold for too long, can also cause damage to the mold.
So far, there are still many companies that choose chemical cleaning, manual grinding, sandblasting cleaning, etc. If manual cleaning uses coarse-grained scrubbing gaskets, emery cloth, sandpaper, grindstone or brushes with nylon bristles, brass or steel to manually grind the mold, it will cause excessive "cleaning" of the mold, and the use of sandblasting cleaning will also make sand and gravel adhere to it, and unclear washing will lead to defective products in subsequent production. With the improvement of enterprises' requirements for mold quality, the innovation of cleaning technology has become urgent.
In response to this phenomenon, Shengtong Intelligent Laser Equipment Group has introduced new ideas. The developed laser mold washing machine can handle this situation very well. For the production of rubber, silicone, pu and other types of molds, attachments can be completely removed in an instant, and it is easy to use. The product does not damage the mold when cleaning the mold, and can also prolong the use time of the mold, reduce the maintenance cost of the enterprise mold, and improve the efficiency of cleaning the mold. At present, Shengtong Intelligent Laser Washing Mold has been applied in many mold production enterprises. In the cleaning operation, many employees of the enterprise said that the laser mold washing machine cleans faster and better, and the equipment is easy to operate, does not hurt the mold, and the cleaning efficiency is doubled.
After cleaning, the surface of the mold is cleaned, and there is no residue attached to it. The subsequent products produced are also more controllable and stable. In today's high-quality mold industry, the control of product quality has become particularly important.
As a new type of green industrial cleaning equipment, Shengtong laser mold washing machine has been widely used in the production of various mold industries by virtue of its advantages of not hurting the surface of the mold, fast cleaning speed, good effect, and automatic cleaning. In the future, it will continue to adhere to the concept of "winning the market with excellent technology and repaying users with high-quality service", providing more valuable products for the market and customers, and will gradually bring the laser mold washing machine to more enterprise production to escort the production of enterprises and increase production efficiency.
